What Should You Check Before Summer Begins?

What Should You Check Before Summer Begins?

The first 95-degree day has a way of finding every weak spot in a house. The air conditioner that rattles. The window screen with a hole. The dryer vent nobody has looked at since last year. If you are asking what you should check before summer begins, the answer is a short list that protects your comfort, your safety, and your electric bill.

I like to run through summer prep in the same order every year: cooling system first, then safety, then the outdoor spaces. Cooling goes first because a repair call in July can mean a long wait and a hot house.

This guide covers the quick answer, a checklist table by area, thermostat and filter data from published energy guidance, a simple one-week schedule, mistakes to avoid, and a short FAQ. Everything here suits an ordinary home, and most tasks need no special tools. Work through it a little at a time and you will head into summer with far fewer surprises.

What should you check before summer begins?

Before summer begins, check your air conditioner and replace its filter, test smoke and carbon monoxide alarms, clean dryer vents, inspect window screens and door seals, clear gutters and outdoor drains, and look over decks, fences, and outdoor outlets. Set the thermostat near 78°F when you are home to keep cooling costs under control.

What should you check, area by area?

AreaTaskWhy it mattersTime
Air conditionerReplace filter, clear debris around the outdoor unitProtects airflow and efficiency30 min
ThermostatTest it, set a scheduleCuts cooling use when you are out15 min
AlarmsTest smoke and CO alarmsSafety does not take a summer break15 min
DryerClean the lint trap and ventReduces fire risk30 min
Windows and doorsRepair screens, check sealsKeeps insects out and cool air in1 hr
Gutters and drainsClear leaves and debrisHandles summer storms1 hr
Outdoor areasCheck decks, railings, outdoor outletsPrevents injuries and shocks30 min

What does the data say about cooling costs?

The Department of Energy recommends setting your thermostat to at least 78 degrees when you are home. A clogged filter can reduce airflow and put extra strain on the system.

CheckGuidance
Thermostat when home78°F
Thermostat when awayRaise it several degrees
AC filterChange every one to two months
Filter swap and energy useA fresh filter can cut energy use by 5 to 15 percent
Ceiling fanLets you raise the AC setting 2 to 4 degrees

Climate, system type, and personal comfort vary, so treat these numbers as starting points.

How can you spread the work over one week?

DayFocusTasks
MondayCoolingReplace filter, clear the outdoor unit, test the thermostat
TuesdaySafetyTest alarms, clean dryer lint trap and vent
WednesdayOpeningsRepair screens, check weatherstripping
ThursdayWaterClear gutters, check downspouts
FridayOutdoorsInspect deck, fence, outdoor outlets

If the AC does not cool well after a filter change, call a licensed technician early, before the summer rush.

What mistakes should you avoid?

  • Setting the thermostat very low at startup. It will not cool the house faster.
  • Blocking the outdoor unit. Keep plants and clutter clear so air can flow.
  • Skipping the dryer vent. Lint buildup is a fire risk.

Frequently asked questions

When should you service your air conditioner?
Spring is ideal, before the first heat wave, since technicians get busy once temperatures climb.

Does a ceiling fan save money?
It can. The fan cools people, not rooms, so turn it off when nobody is there.

What is the most important summer check?
Cooling and safety come first. A working AC and tested alarms matter more than cosmetic tasks.

Bottom line

Start with the air conditioner and filter, then test your alarms, clean the dryer vent, and walk the outdoor spaces. Set the thermostat near 78°F when you are home, and do the work before the first heat wave.

For summer beginning ideas must visit https://tipsbydecoratoradvice.com/https-decoratoradvice-com/

Post Comment